39mm Clip Ons Handlebar 1" Bar For Harley Davidson Sportster 883 1200 Dyna Fat Street Bob Low Rider Super Glide
Features:
The Clip-Ons are an economical replacement handlebar with amazing strength. They are machined from solid billet with a removable handlebar. In the event of a crash, you simply replace the handlebar tube instead of the entire Clip-on. The Clip-Ons mount to the front forks, below the top triple clamp for a low handlebar position. Transform your XL Sportster into a Café Racer.
Specification:
- Brand: Nicecnc
- Condition: 100% Brand New
- Bar Length: 27cm
- Bar Size: 25mm /Aprx 1"
- Clip Ons Diameter: 39mm
- Color: Black
Package Included:
1 Set Clip Ons Handlebar (Left & Right)
Note:
- Clip-on handlebars are primarily designed for race use and may not fit to a standard bike without other modifications
- Bars are Not Dimpled or Pre-Drilled.
Installation Note:
- 1. These clip ons are not OEM replacement parts. clip ons are for race use only.
- 2. Remove old clip ons and clean mounting areas free of grime, dirt, etc.
- 3. Install both collars and snug screws.
- 4. Install handlebar tubes and adjust both bodies to desired angle. Ensure that bars are in a position that will not interfere with turning.
- 5. Tighten bodies to fork legs.
- 6. Adjust handlebar tubes to desired length and tighten.
- 7. Turn steering from lock to lock and be sure there are no obstructions when doing so.
- 8. You may need to drill small hole(s) in the throttle and/or clutch side handlebar tube(s) for the control switch housing.
- 9. Install controls and check again to make sure there are no obstructions when turning from lock to lock.
- 10. When all steps are complete, you’re ready to ride. Always check bolts before riding to ensure they are tight.
Fitment:
Fits all with 39mm Forks Harley, Bobber, Chopper, Cruiser, Cafe Racer...
1988-2017 Harley Sportster 883 1200
2008-2012 Harley Sportster XR 1200
1988-2000 Harley Dyna Super Glide FXR
2006-2015 Harley Dyna Street Bob
1988-2015 Harley Dyna Low Rider
2008-2015 Harley Dyna Fat Bob
2012-2015 HARLEY DYNA SWITCHBACK
1988-2015 HARLEY DYNA SUPER GLIDE
1993-2015 HARLEY DYNA WIDE GLIDE
1988-1993 HARLEY DYNA SPORT GLIDE
2008-2012 Harley Sportster XR 1200
1988-2000 Harley Dyna Super Glide FXR
2006-2015 Harley Dyna Street Bob
1988-2015 Harley Dyna Low Rider
2008-2015 Harley Dyna Fat Bob
2012-2015 HARLEY DYNA SWITCHBACK
1988-2015 HARLEY DYNA SUPER GLIDE
1993-2015 HARLEY DYNA WIDE GLIDE
1988-1993 HARLEY DYNA SPORT GLIDE
Disclaimer: Nicecnc Store parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Harley-Davidson，KTM, Duke，Aprilia，Triumph，Husqvarna, Honda, Yamaha, Kawasaki, Suzuki, Beta, GASGAS, Sherco, Polaris, Can-am, Arctic Cat, Ski-Doo，Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian,etc.
$37.99
39mm Clip Ons Handlebar 1" Bar For Harley Davidson Sportster 883 1200 Dyna Fat Street Bob Low Rider Super Glide—
$37.99
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Features:
The Clip-Ons are an economical replacement handlebar with amazing strength. They are machined from solid billet with a removable handlebar. In the event of a crash, you simply replace the handlebar tube instead of the entire Clip-on. The Clip-Ons mount to the front forks, below the top triple clamp for a low handlebar position. Transform your XL Sportster into a Café Racer.
Specification:
- Brand: Nicecnc
- Condition: 100% Brand New
- Bar Length: 27cm
- Bar Size: 25mm /Aprx 1"
- Clip Ons Diameter: 39mm
- Color: Black
Package Included:
1 Set Clip Ons Handlebar (Left & Right)
Note:
- Clip-on handlebars are primarily designed for race use and may not fit to a standard bike without other modifications
- Bars are Not Dimpled or Pre-Drilled.
Installation Note:
- 1. These clip ons are not OEM replacement parts. clip ons are for race use only.
- 2. Remove old clip ons and clean mounting areas free of grime, dirt, etc.
- 3. Install both collars and snug screws.
- 4. Install handlebar tubes and adjust both bodies to desired angle. Ensure that bars are in a position that will not interfere with turning.
- 5. Tighten bodies to fork legs.
- 6. Adjust handlebar tubes to desired length and tighten.
- 7. Turn steering from lock to lock and be sure there are no obstructions when doing so.
- 8. You may need to drill small hole(s) in the throttle and/or clutch side handlebar tube(s) for the control switch housing.
- 9. Install controls and check again to make sure there are no obstructions when turning from lock to lock.
- 10. When all steps are complete, you’re ready to ride. Always check bolts before riding to ensure they are tight.
Fitment:
Fits all with 39mm Forks Harley, Bobber, Chopper, Cruiser, Cafe Racer...
1988-2017 Harley Sportster 883 1200
2008-2012 Harley Sportster XR 1200
1988-2000 Harley Dyna Super Glide FXR
2006-2015 Harley Dyna Street Bob
1988-2015 Harley Dyna Low Rider
2008-2015 Harley Dyna Fat Bob
2012-2015 HARLEY DYNA SWITCHBACK
1988-2015 HARLEY DYNA SUPER GLIDE
1993-2015 HARLEY DYNA WIDE GLIDE
1988-1993 HARLEY DYNA SPORT GLIDE
2008-2012 Harley Sportster XR 1200
1988-2000 Harley Dyna Super Glide FXR
2006-2015 Harley Dyna Street Bob
1988-2015 Harley Dyna Low Rider
2008-2015 Harley Dyna Fat Bob
2012-2015 HARLEY DYNA SWITCHBACK
1988-2015 HARLEY DYNA SUPER GLIDE
1993-2015 HARLEY DYNA WIDE GLIDE
1988-1993 HARLEY DYNA SPORT GLIDE
Disclaimer: Nicecnc Store parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Harley-Davidson，KTM, Duke，Aprilia，Triumph，Husqvarna, Honda, Yamaha, Kawasaki, Suzuki, Beta, GASGAS, Sherco, Polaris, Can-am, Arctic Cat, Ski-Doo，Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian,etc.
